The MPPT Control lets you see the status as well as set up all BlueSolar MPPT Charge Controllers that have a VE. Direct communications port. The new MPPT Control is mounted in the familiar
BMV-700 series housing, maintaining a consistent and professional look to your panels and systems monitoring equipment.
See the user and installation manual as well as our
MPPT Control blog post for more information.
To easily mount the MPPT Control on a wall, instead of flush-mounted in a panel, use one of our wall mount enclosures. See the related products slider below.
Features 1. View live status information, including solar watts, battery voltage, charge current, load current, and more.
2. View historical information
A. All-time values
B. 30-day historical values
3. MPPT setup
Communication cable Connect the MPPT Control to the BlueSolar MPPT Charge Controller with a VE. Direct cable. Note that this cable is not included and needs to be purchased separately.
Power cable with inline fuse Wiring the supplied power cable is only necessary when the used MPPT is an MPPT 75/50, 100/50, or 150/35, and its part number starts with SCC01. These earlier versions shut down at night. In this case, use the fused power cable to power the MPPT Control straight from the battery. This way, the MPPT Control stays powered while the MPPT is off, and the last received status, history, and settings of the MPPT can be viewed when the sun is down.
Wiring this power cable is not necessary for all other models, neither for the SCC02 nor later versions of the three mentioned models.
Wall mount enclosure Optional wall mount enclosures are available to easily mount the MPPT Control on a wall, instead of flush-mounted through a panel.
