Description
Profile
Router Bits With Plunge Cut Capability
Pierce & Round Over
Plunge Bit
This
Very Special Router Bit Is A Round Over Bit With A Slightly Longer Straight Cutting
Edge At The Bottom. Round Overs Are Classified By The Radius They Cut. A &Frac12; Inch
Radius Bit (12,7 Mm) Cut A Round Over With A &Frac12; Inch Radius.
Rounded
Edges Give A Project A Softer, Smoother Look. The Greater The Radius Of The Round Over,
The More Pronounced This Effect Becomes. By Extending The Bit Slightly A Fillet
Can Be Produced.
Rounding An Edge Makes It More Durable Because It Won't Show Dents, Splinter,
Or Lose Its Finish As Easily As A Sharp Corner. Like A Knife That Loses Its Sharp
Edge, A Rounded Corner Is More 'Friendly' To People Or Objects That Come In Contact
With It.
These Anti Kickback Bits Have More Body Mass, And Their Enlarged Bodies Prevent
The Bits From Biting Too Deeply And Catching On The Material, A Design That Minimizes
The Risk Of Work Piece Kick Back . The Greater Body Mass Also Helps To Dissipate
Heat And Keep The Bits Sharp For Longer.
Using
An Edge Guide With The Router, It Is Possible To Use The Router Bit To Round Over
Outside Edges With A Fillet Or Without.
Definition: Cutting A Groove In A Wood
Surface Producing A Groove With Rounded Shaped Sides With A Specified Radius.
&Nbsp;
This Router Bit Has A
12.7 Mm Shank (Shaft) That Will Fit Most Large Routers. Please
Ensure That You Select A Router Bit With A Shank (Shaft) Size That Will Fit
Into Your Router Collet.
&Nbsp;
Pro Tech
Router Bits Are Manufactured In Taiwan.